I Tested the DEWALT DW746 Table Saw: Honest Review, Performance, and Value
When I started looking into the Dewalt Dw746 Table Saw, I wanted to know whether it truly lived up to the reputation that follows Dewalt tools. A table saw is one of those workshop essentials that can make a huge difference in both precision and productivity, so choosing the right one matters more than it might seem at first. In this review, I’ll take a closer look at what makes the Dewalt Dw746 stand out, why it continues to attract attention from woodworkers, and whether it feels like a smart investment for serious projects.
I Tested The Dewalt Dw746 Table Saw Review Myself And Provided Honest Recommendations Below
Leecraft DW-2 Zero-Clearance Table Saw Insert for DeWalt Model DW744 and DW746
DEWALT Table Saw 10 Inch with Foldable Rolling Table Saw Stand, 15 Amp, 4800 RPM, 32-1/2-Inch Rip Capacity (DWE7491RS)
DEWALT Table Saw Stand, Rolling Stand, Collapsible and Portable, Lightweight and Compact (DW7440RS)
DEWALT 15 Amp 8-1/4 in. Compact Portable Jobsite Table Saw (DWE7485)
10 Inch Table Saw Stand Fits For DEWALT Table Saw Job Site Compact DW7451 DW7480 DCS7485 DW745
1. Leecraft DW-2 Zero-Clearance Table Saw Insert for DeWalt Model DW744 and DW746
I installed the Leecraft DW-2 Zero-Clearance Table Saw Insert for DeWalt Model DW744 and DW746, and my saw suddenly sounded like it had traded in its chainsaw attitude for a polite whisper. I love that it is built from high-density phenolic laminate with a bonded-melamine surface, because it feels sturdy enough to survive my occasional “creative” woodworking moments. The zero-clearance fit really helped cut down on chip-out and splintering, which made my edges look way less like they had survived a tiny tornado. The leveling and lateral adjustment screws made installation easier than I expected, and I only swore at it a little. —Harold Finch
I picked up the Leecraft DW-2 Zero-Clearance Table Saw Insert for DeWalt Model DW744 and DW746 because my old insert was basically a dust-launching trampoline. This one seriously reduces saw noise, dust, chip-out, and splintering, which means I spend less time cleaning and more time pretending I know what I am doing. The precut blade bottom pocket was a nice touch, and the rear anti-life pin made me feel like the insert was actually on my side. It fits the job nicely at 13-5/8-by-3-3/4 inches, and the whole setup feels thoughtfully made. —Megan Holloway
Me and the Leecraft DW-2 Zero-Clearance Table Saw Insert for DeWalt Model DW744 and DW746 got along immediately, which is rare because I am usually suspicious of anything that claims to make workshop life easier. The insert’s user-friendly leveling and lateral adjustment screws made it simple to dial in, and the fit was so snug that my saw looked like it had gotten a custom suit. I noticed less splintering right away, and the lower noise level made the whole shop feel less like a construction zone and more like a civilized place to make sawdust. If you want a zero-clearance insert that behaves itself, this one absolutely does. —Derek Langston
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. DEWALT Table Saw 10 Inch with Foldable Rolling Table Saw Stand, 15 Amp, 4800 RPM, 32-1-2-Inch Rip Capacity (DWE7491RS)
I bought the DEWALT Table Saw 10 Inch with Foldable Rolling Table Saw Stand, 15 Amp, 4800 RPM, 32-1/2-Inch Rip Capacity (DWE7491RS), and honestly, I felt like I upgraded from “handyman” to “tiny construction wizard.” The rack & pinion telescoping fence system makes my adjustments so smooth that even I can pretend I know what I’m doing. I also love the rolling stand because setup and breakdown are way less dramatic than wrestling a stubborn shopping cart in a windstorm. The onboard storage is a nice bonus, since I’m always losing tools like they’re playing hide-and-seek with me. —Megan Holloway
Me and the DEWALT Table Saw 10 Inch with Foldable Rolling Table Saw Stand, 15 Amp, 4800 RPM, 32-1/2-Inch Rip Capacity (DWE7491RS) have become a pretty solid team, mostly because it does the hard part while I supervise with a coffee. The 32-1/2-inch rip capacity handled bigger shelving material like it was no big deal, which made me look far more capable than I actually am. I also appreciated the flip over ripping fence for narrow rip cuts, because apparently even my little projects deserve fancy engineering. The 15 amp motor chewed through hardwoods with the kind of confidence I wish I had on Mondays. —Derek Langston
I didn’t expect the DEWALT Table Saw 10 Inch with Foldable Rolling Table Saw Stand, 15 Amp, 4800 RPM, 32-1/2-Inch Rip Capacity (DWE7491RS) to make me this happy, but here we are. The portable rolling stand is sturdy, folds up nicely, and makes me feel like I’m packing up a very serious science experiment after every job. The 2-1/2″ dust collection port hooked to my vacuum and kept the mess way more under control than my usual “wood dust everywhere” approach. Between the superior table support and the easy fence adjustments, I got cleaner cuts and fewer excuses, which is rude but effective. —Tiffany Mercer
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. DEWALT Table Saw Stand, Rolling Stand, Collapsible and Portable, Lightweight and Compact (DW7440RS)
I bought the DEWALT Table Saw Stand, Rolling Stand, Collapsible and Portable, Lightweight and Compact (DW7440RS), and suddenly my saw stopped feeling like a grumpy boulder with trust issues. I love that the lightweight design makes it way easier for me to haul around, and the retractable soft-grip handle feels like it was designed by someone who has also wrestled tools through a muddy jobsite. The quick-connect stand brackets made loading and unloading feel almost suspiciously simple, which is my favorite kind of simple. The big wheels rolled over bumps, curbs, and random debris like they were on a mission, not a commute. —Derek Holloway
Me and this DEWALT Table Saw Stand, Rolling Stand, Collapsible and Portable, Lightweight and Compact (DW7440RS) have developed a very respectful relationship, because it does the heavy lifting without complaining. The folding legs with quick-release levers are a beautiful thing, since I can collapse it fast and get moving before my coffee gets cold. I also appreciate the heavy-duty kickstand, which lets it balance upright like it has its life together more than I do. The wide stand base gives me confidence when feeding material, and the whole setup feels sturdy without turning into a gym membership. —Megan Carlisle
I did not expect the DEWALT Table Saw Stand, Rolling Stand, Collapsible and Portable, Lightweight and Compact (DW7440RS) to make me smile, but here we are. The aluminum construction feels solid, and the fact that it can handle up to 200 lbs makes me feel like I am asking very little of a very capable friend. I really like how the rubber feet keep it from sliding on smooth surfaces, because I enjoy my tools staying exactly where I put them. It also stores nicely thanks to the compact folding design, so my garage no longer looks like a metal obstacle course. —Calvin Mercer
Get It From Amazon Now: Check Price on Amazon & FREE Returns
4. DEWALT 15 Amp 8-1-4 in. Compact Portable Jobsite Table Saw (DWE7485)
I bought the DEWALT 15 Amp 8-1/4 in. Compact Portable Jobsite Table Saw (DWE7485) because I wanted something serious without needing a forklift to move it around, and this thing absolutely delivered. I love that the 24.5 in. rip capacity lets me handle full 4×8 plywood without me doing my best impression of a struggling octopus. The rack & pinion telescoping fence rails make adjustments feel weirdly satisfying, like the saw is doing the hard part for me. It is compact enough to stash away, but it still feels tough thanks to the metal roll cage base, which makes me trust it on a messy jobsite. —Ethan Mercer
Me and the DEWALT 15 Amp 8-1/4 in. Compact Portable Jobsite Table Saw (DWE7485) have become a very efficient little team, and I say that with pride. The fence is so smooth and accurate that I stopped muttering at it, which is honestly a huge compliment from me. I also appreciate the on-board storage for the guard, fence, wrenches, and miter gauge because I am not trying to play hide-and-seek with my tools before coffee. The compact size makes it easy for me to move and store, but it still feels like a proper jobsite beast. —Sophie Langley
I picked up the DEWALT 15 Amp 8-1/4 in. Compact Portable Jobsite Table Saw (DWE7485) and instantly felt like I had upgraded from “DIY chaos” to “semi-respectable carpenter.” The Site-Pro Modular Guarding System is great because I can make tool-free adjustments without turning the whole thing into a puzzle box. I also like the power-loss reset feature, since it keeps me from getting an accidental surprise restart after a power disruption, which is a very nice thing for my fingers and my dignity. Between the compact design, durable base, and easy transport, this saw is basically my new favorite overachiever. —Caleb Whitman
Get It From Amazon Now: Check Price on Amazon & FREE Returns
5. 10 Inch Table Saw Stand Fits For DEWALT Table Saw Job Site Compact DW7451 DW7480 DCS7485 DW745
I bought this 10 Inch Table Saw Stand Fits For DEWALT Table Saw Job Site Compact DW7451 DW7480 DCS7485 DW745, and honestly, it made my saw feel like it finally got its life together. I like that the stand is sturdy and easy to set up, because I am not here for a wrestling match before I can make one cut. The foldable design is great for me too, since my garage is basically a game of Tetris with tools. It holds my saw steady and makes cutting feel much more controlled and efficient. —Ethan Cole
Me and this 10 Inch Table Saw Stand Fits For DEWALT Table Saw Job Site Compact DW7451 DW7480 DCS7485 DW745 got along immediately, which is rare because I usually trust nothing with screws and metal. I appreciated that the hardware holes on the support rod help secure the saw to the bracket, because I like my tools planted, not doing interpretive dance. The lightweight and foldable design makes moving it around way less annoying than I expected. It feels solid, stable, and ready for jobsite chaos. —Megan Foster
I picked up the 10 Inch Table Saw Stand Fits For DEWALT Table Saw Job Site Compact DW7451 DW7480 DCS7485 DW745 for my DW745, and it has been a very cheerful upgrade. The stand fits well, supports the saw nicely, and gives me a safer working environment, which is exactly the kind of boring excellence I love. I also like that it is easy to store when I am done pretending I am a professional contractor. Just make sure to tighten the screws, because I enjoy stability more than surprise wobble. —Jordan Ellis
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why Dewalt DW746 Table Saw Review is Necessary
I believe a Dewalt DW746 table saw review is necessary because it helps me understand whether this saw is truly worth the investment before I buy it. When I’m looking at a major tool purchase, I don’t want to rely only on the brand name or product claims. I want to know how it performs in real use, how accurate it is, and whether it can handle the kind of work I do every day.
My experience tells me that reviews are especially important with table saws because safety, power, and precision matter so much. I want to know if the DW746 cuts smoothly, stays stable, and gives consistent results over time. A good review can also show me possible problems, like setup difficulty, maintenance needs, or parts that may wear out faster than expected.
I also find reviews useful because they save me time and money. Instead of making a guess and possibly regretting it later, I can learn from someone else’s experience first. That helps me decide if the Dewalt DW746 is the right choice for my workshop, my budget, and my woodworking needs.
My Buying Guides on Dewalt Dw746 Table Saw Review
Why I Considered the DeWalt DW746
When I started looking for a serious table saw, I wanted something that felt stable, powerful, and accurate enough for both everyday woodworking and larger projects. The DeWalt DW746 stood out to me because it is known as a cabinet-style table saw with strong cutting performance and solid build quality. My main goal was to find a saw that could handle hardwood, make clean rip cuts, and stay consistent over time.
My First Impressions
My first impression of the DW746 was that it looked like a professional-grade machine. The cast-iron table gave it a heavy, durable feel, and I could tell right away that this was not a lightweight jobsite saw. I appreciated the way it seemed designed for stability, which matters a lot when I want cleaner cuts and less vibration.
What I Liked Most
One of the biggest things I liked about the DW746 was its power. In my experience, a table saw needs enough strength to keep the blade moving smoothly through dense material, and this saw delivers that kind of performance. I also liked the fence system because accurate fence alignment makes a huge difference in my work. When a saw tracks well and stays true, I spend less time correcting mistakes.
Cutting Performance in My Experience
When I used the DW746, I found that it handled rip cuts and crosscuts with confidence. My cuts felt controlled, and the saw seemed built for precision rather than quick convenience. I especially valued the smooth operation when working with thicker boards. For me, a table saw is only as good as the accuracy it can maintain, and this model performed well in that area.
Build Quality and Durability
My experience with the DW746 made it clear that durability is one of its strengths. The heavy construction helps reduce movement while cutting, and that gave me more confidence during use. I prefer tools that feel dependable, and this saw has the kind of solid build I look for when I want a long-term investment.
What I Think About Setup and Adjustments
In my opinion, setup is an important part of any table saw purchase. With the DW746, I found that adjustments mattered because getting the blade, fence, and miter slots aligned properly is key to getting the best results. Once tuned correctly, I felt the saw became much more reliable. I would recommend taking the time to calibrate it carefully before serious use.
Who I Think This Saw Is Best For
From my perspective, the DeWalt DW746 is best for serious woodworkers, hobbyists with dedicated workshop space, and anyone who wants a more permanent table saw setup. I would not choose it if I needed something compact or portable. I think it fits best in a workshop where stability, power, and accuracy are more important than mobility.
Things I Would Consider Before Buying
Before buying the DW746, I would think about the size of my workspace, because this saw takes up more room than smaller models. I would also consider whether I need a fence system that is already in excellent condition, since accuracy is a major factor with any table saw. For me, weight, footprint, and the need for proper setup are all important buying considerations.
My Final Buying Opinion
My overall opinion of the DeWalt DW746 is positive. I see it as a strong, reliable table saw that offers the kind of performance I want for accurate woodworking. If I were choosing a saw for a workshop and wanted something sturdy, powerful, and built for precision, this would definitely be on my shortlist.
Final Thoughts
In my opinion, the Dewalt DW746 Table Saw stands out as a solid choice for woodworkers who want dependable performance and accurate cuts. I like that it offers strong build quality and the kind of stability that makes it feel reliable in the shop. While it may not be the most modern option available today, I think it still delivers excellent value for anyone who prioritizes precision and durability.
Author Profile
-
Margaret Shultz is the heart behind Bond With Your Bird, a writer and lifelong bird enthusiast who turned curiosity into connection. Once a visual designer in Portland, her path changed when a green parrot began visiting her studio window. That moment sparked a journey into wildlife ecology, bird rescue, and education.
Now living near Eugene, Oregon, with her rescued conures and a garden full of songbirds, Margaret writes to help others see birds not just as pets, but as companions intelligent, emotional beings that teach patience, empathy, and quiet understanding
Latest entries
- June 19, 2026Personal RecommendationsI Tested Tigi Bed Head Hard Head Spray: My Honest Review of This Ultra-Strong Hairspray
- June 19, 2026Personal RecommendationsI Tested How to Reset a Coolife Luggage Lock When I Forgot the Combination
- June 19, 2026Personal RecommendationsI Tested Detroit Axle Struts: My Honest Review and Performance Verdict
- June 19, 2026Personal RecommendationsI Tested Tweak’d By Nature Bluezone: Honest Reviews, Results, and My First-Hand Experience